370 Modular stack lights communicate with the operators through light signals.
370 serie's modular stack light has been developed of machines in the last 50 years.
The quality, life and innovative technical solutions of this LED stack lights are the bases of its success.
The first LED stack light that permitted to combined up to 7 units or audio signal device, to use multicolor and multifunction modules, with high brightness or multi-feeds.
A simple bayonet allows the sectors of stack light to be combined and simultaneously electrically connected.
Multicolor modules with multiple and multifunctional communication
LED high brightness lighting, with rotating function, slow, fast and multiple flashing
Available anti-removal block.
Possible power supply with two different voltages, for example 24 dc and 230 v ac.
Cable with connector M12 with 5 or 8 indicators output.
Easy and functional removal thanks to Click Clack quick device.
Connecting units between the various modules and control circuits, essential for the correct working of the stack light.
It allows the assembly of 7 light units or alternatively 6 lights units plus an acoustic module.
Suitable for direct mounting or on policarbonate extension pole.
OPERATING VOLTAGE: Max 240V, 35 W
COLORS: Black: RAL 9005. Light Grey: RAL 7035. Grey: RAL 7004.
Available connection with terminal block or M12 connector.
3 types of direct fixing.
A simple solution to save on shipping costs of machines.
VERSIONS:
- 8 poles connection block (max 240 V)
- Base with integrated 5-pin M12 connector (max 125 V), it allows to pilot 4 units maximum
- Base with integrated 8-pin M12 connector (max 125 V), it allow to pilot 7 units maximum
COLORS: Black: RAL 9005, Light Grey RAL 7035
Connection module with magnetic restraint:
- Facilitate mounting, no drilling to install it.
- High flexibility of use, possibility of fast re-positioning.
- Perpendicular installation without problems
- It's recommended max 5 units (4 visual + 1 audio unit)
Equipped with cap top closure when the acoustic device is not used
OPERATING VOLTAGE: Max 240 V, 35 W
COLORS: Black: RAL 9005. Light Grey: RAL 7035. Grey: RAL 7004.
Terminal modules for lateral entry of the connecting conductor.
The connection terminal block has 8 terminals, it allows the assembly of 7 visual unit or 6 visual unit and an acoustic device.
Possibility of direct installation. Equipped with cap top covers when the acoustic device is not used.
OPERATING VOLTAGE: Max 240V, 35 W
COLORS: Black: RAL 9005. Light Grey: RAL 7035. Grey: RAL 7004.
Pre-wired version with cable or cable with connector.
Connecting units between the various modules and control circuits, essential for the correct working of the stack light.
Equipped with cap top cover when tha acoustic device is not used.
VERSIONS
- wired with M12 connector 5 poles complete of 30 cm cable. It allows the assembly of 4 units.
- wired with cable to 5 poles, 50 cm lenght. It allows the assembly of 4 units.
COLORS: Black: RAL 9005. Light Grey: RAL 7035. Grey: RAL 7004.
OPERATING VOLTAGE: Max 240V, 35 W
QUADRICOLOR module with bright and diffused lighting.
In the presence of 2 or more alarms the module is illuminated alternately in the corresponding colors.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
COLORS
red, orange, blue, green
LIGHTING
steady or flashing light
NUMBER OF STACKABLE UNIT
max 2 in addition to the QUADRICOLOR unit
CURRENT CONSUMPTION
110 mA
TRICOLOR module with bright and diffused light.
In the presence of 2 or more alarms the module is illuminated alternately in the corresponding colors.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
COLORS
2 versions: red, orange, and green or red, orange and blue
LIGHTING
steady, flashing or rotating light
NUMBER OF STACKABLE UNITS
max 3 in addition to the TRICOLOR units
CURRENT CONSUMPTION
100 mA
Steady light module with diffuses lighting.
Progressive color variations of the module delete the possibility of incorrect communications. The use of LEDs as a light source ensures safety for operators.
Eco-friendly design; recyclability, reusability and reparability.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
with 10 high brightness LEDs
BULB TYPE
with bayonet connection type BA 15d
OPERATING VOLTAGE
From 24 V to 240 V
CURRENT CONSUMPTION
max 50 mA
The use of high brightness LED, ensure safe communications in all operating conditions. LED tecnology cancels maintenance, ensure long life and greate safety for operators.
Eco-friendly design; recyclability, reusability and reparability.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
with 45 high brightness LEDs
- differentiated light: Progressive color variations of the module delete the possibility of incorrect communications.
- diffused light: The module is illuminated evenly over all its surface.
BULB TYPE
with bayonet connection type BA 15d
OPERATING VOLTAGE
from 24 to 240 V
CURRENT CONSUMPTION
max 150 mA
Steady light module with BA 15d lamp holder allows the use of LED bulbs in addition to 5 W incandescent bulbs.
Eco-friendly design; recyclability, reusability and reparability.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
LED or incandescent bulbs
BULB TYPE
with bayonet connection type BA 15d - Max 5 W
OPERATING VOLTAGE
from 12 to 240 V
Flashing lights module guarantees reliable and unequivocal information over time. LED technology cancels maintenance costs, ensures long life and greater safety for operators.
Eco-friendly design; recyclability, reusability and reparability.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
LED bulb
- differentated light: the progressive color variations delete the possibility of incorrect communications
FLASHING FREQUENCY
about 1,4 Hz (84 flashes per minute)
BULB
with bayonet connection type BA 15d - Max 5 W
OPERATING VOLTAGE
from 12 V to 240 V
CURRENT CONSUMPTION
LED bulbs: 24 V, 50 mA – 115 V, 20 mA – 240 V 15 mA
High brightness LED bulb: 24 V, 130 mA – 115 V, 25 mA – 240 V 20 mA
High brightness LED module, excellent signalling at great distance and in very bright environments. LED technology cancels maintenance and ensures long life.
Eco-friendly design; recyclability, reusability and reparability.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360°diffusion
LIGHT SOURCE
with 45 high brightness LEDs
- differentiated light: Progressive color variations of the module delete the possibility of incorrect communications.
- diffused light: The module is illuminated evenly over all its surface.
FLASHING FREQUENCY
about 1,4 Hz (84 flashes per minute)
BULB
with bayonet connection type BA 15d
OPERATING VOLTAGE
from 24 to 240 V
CURRENT CONSUMPTION
LED bulb: 24 V, 50 mA – 115 V, 20 mA – 240 V 15 mA
High brightness LED bulb: 24 V, 130 mA – 115 V, 25 mA – 240 V 20 mA
Flashing module with different lighting. Progressive color variations of the module delete the possibility of incorrect communications.
Eco-friendly design; recyclability, reusability and reparability.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
filaments bulbs
BULB TYPE
with bayonet connection type BA 15d
FLASHING FREQUENCY
About 1,4 Hz (84 flashes per minute)
OPERATING VOLTAGE
from 12 to 240 V
CURRENT CONSUMPTION
5 W filament bulbs: 24 V, 130 mA – 115 V, 25 mA – 240 V, 15 mA
Strobe module is ideal for drawing attention. The yellow and blue colors enhance the characteristics of Xenon lamps.
Eco-friendly design; recyclability, reusability and reparability.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
The module uses XENO gas.This source produces a short and intense flash. The white light is similar to sunlight but not to continuous spectrum.
FLASHING FREQUENCY
about 0,8 Hz (50 flashes per minute)
OPERATION VOLTAGE
from 24 to 240 V
CURRENT CONSUMPTION
24 V dc, 75 mA - 24 V ac, 135 mA
115 V ac, 20 mA – 240 V ac 15 mA
Programmable LED module, 2 functions: Flashing or steady light, ensures safe communications and simple storage management. Same colors of lens and light source.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
SMD high brightness LED
- different light: Progressive color variations of the module eliminate wrong communications.
- diffused light: The module is illuminated evenly over all its surface.
FUNCTIONS
Flashing or steady light
FLASHING FREQUENCY
from 1 Hz Min. to 2 Hz Max.
OPERATING VOLTAGE
24 V AC/DC
CURRENT CONSUMPTION
50 mA (same for all lighting types)
Multifunction LED module, 7 types of lighting: steady, flash, rotating, speedy rotating, flashing, speedy flashing, alternating flashing. The best of flexibility, meets any signalling requirements
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
36 SMD high brightness LEDs
- different light: Progressive color variations of the module delete the possibility of incorrect communications.
- diffused light: The module is illuminated evenly over all its surface.
FUNCTIONS
Steady, flashing, flash and rotating light
FLASHING FREQUENCY
From 1 Hz min. to 2 Hz max
ROTATING FREQUENCY
About 1 Hz (60 rotation per minute)
OPERATING VOLTAGE
24 V ac/dc
CURRENT CONSUMPTION
24 V dc, 55 mA; 24 V ac, 85 mA (same for all type of lighting)
QUADRICOLOR module, bright and diffused light with multichannel audible unit. Possibility to be controlled remotely
In the presence of 2 or more alarms the module is illuminated alternately in the colors corresponding to the event.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
COLORS
red, orange, blue, green
TYPE OF ILLUMINATION
SMD high brightness LEDs
FUNCTIONS
steady or flashing light
NUMBER OF STACKABLE UNITS
max 2 in addition to the QUADRICOLOR sector
CURRENT CONSUMPTION
110 mA
SOUND
pulse or continuous with possibility to change tone remotely
TRICOLOR module, bright and diffused light with multichannel audible unit. Possibility to be controlled remotely
In the presence of 2 or more alarms the module is illuminated alternately in the colors corresponding to the event.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
COLORS
red, orange and green or red, orange and blue
TYPE OF ILLUMINATION
steady, flashing or rotating
NUMBER OF STACKABLE UNITS
max 3 in addition to the TRICOLOR sector
CURRENT CONSUMPTION
100 mA
SOUND
pulse or continuous with possibility to change tone remotely
Combined luminous acoustic module is a multifunctional product. It's used as last sector or also as single beacon. Multichannel and powerful acoustic device.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
SMD high brightness LEDs
- different light: progressive color variations of the module delete the possibility of incorrect communications.
- diffused light: the module is illuminated evenly over all its surface.
FUNCTIONS
Flashing, rotating or steady light
SOUND
Pulse or continuous with possibility to change tone remotely
OPERATING VOLTAGE
24 V DC
CURRENT CONSUMPTION
50/130 mA (unchanged for all types of lighting)
The combined light and acoustic device is also widely used as a single warning device in the stack light can be used only as a last unit.
Ideal for attracting attention in higher-risk applications.
TYPE OF OPTICS
Lens with triangular rifling in horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
Incandescent bulb with connecting BA15d to 5 W in addition to our LED bulbs. The module is without bulb.
LIGHTING
- different light: Progressive color variations of the module delete the possibility of incorrect communications.
FUNCTIONS
Steady light
SOUND
Pulse or continuous with possibility to change tone remotely.
OPERATING VOLTAGE
24 V DC (ac)
The combined flashing and acoustic warning device is also widely used as a single warning device in the stack light can be used only as a last sector. Ideal for attracting attention in higher-risk applications.
TYPE OF OPTICS
lens with triangular rifling horizontal and vertical for a correct 360° diffusion
LIGHT SOURCE
incandescent beacons with connecting BA15d da 5 W in addition to our LED bulbs.
LIGHTING
- different light: Progressive color variations of the module delete the possibility of incorrect communications.
FREQUENCY OF FLASHING
about 1,4 Hz (84 flashes per minute)
SOUND
pulse or continuous with possibility to change tone remotely
OPERATING VOLTAGE
24 V DC (ac)
The audio signal device is used to attract the attention of operators in all high-risk processing. It is used on stack lights or as a single acoustic device.
SOUND
pulse or continuous
SOUND FREQUENCY
3.300- 3700 Hz
SIGNAL REPETITION RATE
0,5 Hz
OPERATING VOLTAGE
24 V DC/AC - 115 / 230 AC
CURRENT CONSUMPTION
24 V DC, 32 mA - 24 V AC, 35 mA - 230 V AC, 20mA
PROTECTION DEGREE
type 71, IP30 - type 72, IP64
The audio signal device is used to attract the attention of operators in all high-risk processing. It is used on stack lights or as a single acoustic device. Good sound and protection degree.
SOUND
pulse or continuous
SOUND FREQUENCY
3.300 Hz
SIGNAL REPETITION RATE
0,5 Hz
OPERATING VOLTAGE
24 V DC/AC - 115 / 230 AC
CURRENT CONSUMPTION
24 V, 30 mA - 115 V, 25 mA - 230 V AC, 20 mA
PROTECTION DEGREE
IP54
The audio signal device is used to attract the attention of operators in all high-risk processing. This is used on stack lights or as a single signal device.
SOUND
pulse or continuous
SOUND FREQUENCY
2.600 Hz
SIGNAL REPETITION RATE
0,5 Hz
OPERATING VOLTAGE
24 V DC/AC - 115 / 230 AC
CURRENT CONSUMPTION
24 V, 200 mA - 115 V, 35 mA - 230 V AC, 25 mA
PROTECTION DEGREE
IP64
Particularly suitable in environments with high background noise.
The audio signal device is used to attract the attention of operators in all high-risk processing. This is used on stack lights or as a single acoustic device.
SOUND
pulse or continuous
SOUND FREQUENCY
3.300 Hz
SIGNAL REPETITION RATE
0,5 Hz
OPERATING VOLTAGE
24 V DC/AC - 115 / 230 AC
CURRENT CONSUMPTION
24 V, 200 mA - 115 V, 35 mA - 230 V AC, 25 mA
PROTECTION DEGREE
IP54
Particularly suitable in environments with high background noise. The audio signal device is used to attract the attention of operators in all high-risk processing. This is used on stack lights or as a single signal device.
SOUND
pulse or continuous
SOUND FREQUENCY
600 Hz
SIGNAL REPETITION RATE
0,5 Hz
OPERATING VOLTAGE
24 V DC/AC
CURRENT CONSUMPTION
24 V, 60 mA
PROTECTION DEGREE
IP54
The ability to diversify the alarm tones allows you to identify the machine that requires intervention even in environments with high noise pollution. Already equipped with a cap, the audible unit can only be fitted to the top of stack lights.
SOUND
pulse or continuous
FREQUENCY SOUND
2.400 / 2.600 Hz
OPERATING VOLTAGE
24 V DC/AC
CURRENT CONSUMPTION
24 V, 40 mA
PROTECTION DEGREE
IP54/64